Electric Gate Parts

Electric Gate Parts from all Leadings Manufacturers

Below are some of the popular electric gate parts which we supply and install. All electric gate parts are manufactured by Came.

Frog - Below Ground System

As its name implies this superb, much copied gate machine is designed to operate in damp, below ground level conditions. It is indeed the most popular machine with the discerning customer, who not only wants a long lasting reliable gate machine, but also does not want to see any type of armature attachment on the inside of the gates.

The 'FROG' automation system can be fitted to new gateways or most pairs of existing gates that you may have. West London Security Centre are able to visit your gateway to professionally ensure that the 'FROG' automation system is the best possible solution for your requirement.

The underground gate motors can be operated by all the standard accessories e.g. remote controls, push buttons, keypads etc.

In the eventuality of a power cut the FROG system has a key operated manual release mechanism which is conveniently situated on both the inside and outside of the gateway.

The FROG system is designed to automate either metallic or wooden gates and in every case the pivot arm becomes the bottom hinge for the gate. Once correctly installed, there is no apparent sign of the mechanism other than the lid of the foundation casing box, and it does not detract from the overall aesthetics of an attractive gateway.

The irreversible geared motor firmly locks the gates, unlike hydraulic machines which generally allow their pistons to "relax" and therefore must have an electric locking system which, with the passage of time, invariably becomes an extra thing to malfunction.

The 'FROG' underground gate machine is without doubt, the finest underground gate machine available in the world.

'ATI' motors

The 'ATI' motors are extremely strong and able to cope with heavyweight gates. The strength of the ATI motor is achieved by the irreversibly geared worm drive mechanism. All the models can be operated by all the standard CAME accessories e.g. remote controls, push buttons, keypads etc. In the eventuality of a power cut the 'ATI' machine has a key operated manual release mechanism.

A common application for the ATI series would be to operate a traditional five bar wooden gate. A situation in which the ATI series is very useful, is a pair of closed-in boarded gates in an exposed position, where the force of the wind will pose no problems to the strength of the ATI.

The ATI worm drive electric gate operator is a cost effective and efficient way of automating your gates.

FERNI Articulated Arm Gate Operator

The FERNI articulated arm gate operator is designed to automate gates that are hung from large brick or stone pillars. The FERNI can be operated by all the standard CAME accessories e.g. remote controls, push buttons, keypads etc.

In the eventuality of a power cut the FERNI has a lever operated manual release mechanism which is situated on the motor casing. The simplicity of operation of a winding arm machine always ensures the fastest possible operating of the gate. A common application for the 'FERNI' motor is a situation, such as a gateway directly on a main road, where the gates� opening time needs to be as quick as possible.

Undoubtedly, the 'FERNI' proves to be the fastest and most versatile external electro-mechanical operator.

KRONO - Wing Gates

The KRONO kit is a complete system for a pair of wing gates up to 2.5m each leaf and is most commonly used in small hinge geometry situations.

The motors are worm driven and are very strong and provide very smooth operation. The KRONO kit is a cost effective method of providing a complete automation system for small hinge geometry gates. The kit also comes with a comprehensive user guide.

Electric Sliding Gate

WHENEVER there is limited space in an entrance, an electric sliding gate which takes up little or no room is the ideal solution.

WHENEVER the driveway entrance turns sharply to the right or the left and a wing type gate would form an obstruction to the turning vehicle, then an electric sliding gate is the ideal solution.

WHENEVER extra security is required and the driveway needs to be securely closed off by the electric gate, then the electric sliding gate forms the ideal solution.

The CAME range of electric sliding gate operators has a machine for every size of gate. Residential gates can be opened with the BX or BXE machines and commercial gateways with the BK range or the BY 3500 series. The robust and reliable rack and pinion method of operation is very straightforward and can be used on metal or wooden gates.

The sophisticated electronic control panel can be programmed to accommodate timed auto-closure and partial opening to allow just pedestrian access and can accept wired low voltage signalling from the whole range of CAME accessories.

The installation of an electric sliding gate system is a little more involved than any other type of electric gate as it has to have more civil engineering done at the initial stage, but once the correct ground track and/or cantilever roller frames are installed, then the installation follows the same format as with other types of electric gates, continuing with the mechanical engineering stage of gate fabrication and gate mounting, followed by the final stage of electrical fixing and commissioning.

We are qualified and available to survey your gateway to recommend which sliding gate motor and gate will suit best your individual requirement.